Cloud Mega
ON SOME JC BSI UNITS FVDI/AVDI CORRUPTS THE FLASH WHEN IT READS IT. IT WRITES A NEW FLASH TO ENABLE IT TO READ THE EEPROM, THEN WHEN IT TRIES TO PUT ORIGINAL FLASH BACK IT FAILS CHECKSUM BECAUSE IT IS CORRUPT & THEN LEAVES BSI DEAD IN BOOTMODE.
I don't believe adding power by jumpleads etc. makes any difference whatsoever as reported by others on here. There are just some versions of software that it always seems to corrupt. Even if you read the flash before reading pincode it will be corrupt.
THE FLASH IT READS IS STORED IN DOCUMENTS FOLDER / ABRITES software for ID ******/psa. This will vary slightly depending which version of windows you are running but look in my documents search for psa or maybe view by date modified & it will be obvious.
The problem is you need an undamaged flash at this point. There are some available on other forums. I have not been able to find a few anywhere. Do NOT write the flash or it will wipe the eeprom & need to be reconfigured.
Solution tested & working 100% on numerous vehicles:
1. Find your flash id by opening bsi with fvdi & get 4 digit software signature. Then obtain a good file with this id.
2. Go to the file location & replace the corrupt file with the good 1. Make this file write protected. It must have the exact same name as the original eg. JCI_BSI_7F0B.bin
3. Perform the pin read again with fvdi & it will work correctly, give you the pincode then the car will come back to life. You can then program keys or whatever you wanted to do in the first place.
4. As long as you keep the good file in its location & write protected fvdi will always work ok for any bsi with the same software signature.
Includes:
JCI BSI 7F0B.bin
JCI BSI 1EB7.bin
JCI BSI 40AD.bin
JCI BSI 678A.bin
JCI BSI 838E.bin
JCI BSI 1473.bin
JCI BSI 4372.bin
JCI BSI 2292.bin
JCI BSI 8278.bin
JCI BSI 8278.bin
JCI BSI DBD0.bin
JCI BSI DC04.bin
JCI BSI E2EC.bin
JCI BSI E78C.bin
![402 :402:](./images/smilies/pirat08.gif)
* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
![Image](https://www.motorcarsoft.com/tuto_img_youtube/c/frecciag.gif)
* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
![Image](https://www.motorcarsoft.com/tuto_img_youtube/c/frecciag.gif)