OP-COM Software, Drivers, Firmware, FTClean, MProg, OCFlash, Update Tool, Test tools
192 MB - Cloud Mega
Includes:
OP-COM Test 1.0 (test the adapter by controlling the I/O ports of the adapter's microcontroller)
OP-COM Restore FTDI to Ori v20830 (Restore FTDI to Ori)
OP-COM Loader 1.3b (To flash OP-COM)
OP-COM ID (Shows adapter ID)
OP-COM FTDI Update Tool
OP-CAN 1.2 (Allows you to work with the CAN bus directly, and allows you to receive, send CAN packets. It will be useful for studying the exchange between different blocks of the car, for developing various devices)
OCFlash 1.2 (To flash OP-COM)
OCFlash 1.0 (To flash OP-COM)
MProg 3.5 (Recording VID and PID identifiers)
FTClean 1.0 (Removes drivers from the system)
Software: Diagnostic Opel software Vaux-COM, OP-COM 110530-200603
OP-COM
---- OP-COM 110530a EN-Adv v20830.exe
---- OP-COM 150406d EN_Pro v20830.exe
---- OP-COM 161001a EN-Adv v20830.exe
---- OP-COM 170823c EN_Pro v20830.exe
---- OP-COM 181022a EN_Pro v20830.exe
---- OP-COM 190311a EN-Adv v20830.exe
---- OP-COM 191022a EN-Adv v20830.exe
---- OP-COM 200603a EN_Pro v20830.exe
VAUX-COM
VAUXCOM 160115a GB Pro v20830.exe
Drivers:
2.04.06
2.06.00
2.08.14
2.08.30
2.10.00
2.12.26
Firmware:
FW 1.33 Bootloader.hex
FW 1.39 Bootloader.hex
FW 1.41 Bootloader.hex
FW 1.43 Bootloader.hex
FW 1.44 Bootloader.hex
FW 1.45 Bootloader.hex
FW 1.59 Bootloader.hex
FW 1.60 Bootloader.hex
FW 1.64 Bootloader.hex
Schematics: OP-COM adapter scheme
Schematics.pdf
OP-COM v5.jpg
PIC18F458.JPG
1. Make sure your interface has genuine vid and pid(6001) if not use the restore of ocfd.
if your system has modified ftdi drivers first use the cleaner included then install the proper drivers.
2. Make sure your interface uses ftdi driver that is maximum 2.10.0.0 AND NOT NEWER!!!!! -> this is a must.
3. Make sure your interface has a proper firmware, not some fake 1.70 or 1.99 or some other shit chinese inventions.
To be sure use included ocflash to put one of the firmwares there. Maximum official version is 1.67 on last 2020.06 version.
--------------------I AM NOT RESPONSABLE FOR BROKEN INTERFACES THAT DO NOT HAVE GENUINE PIC18F458-I/PT--------------------
Any interface without this chip is just a copy junk that sooner or later will brake. Buy a 20$ chinese clone and be happy.
Buy a proper one(Genuine V5 model), do the modification to revision C and then you get also manual scan to CH-CAN modules
* Comment obtenir le lien de téléchargement ?.
* How do I get the download link?
viewtopic.php?f=222&t=9976* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296
