H & S Mini Maxx alphanumeric VIN unlock
1) Power up your device (HIGHLY RECOMMENDED to power it via USB source (such as a laptop, or really anything that has a USB port on it) rather than directly to the truck via the OBD-II interface.
2)Press the TOP LEFT button to open the main menu.
3)Scroll down until you see the SHOW SETTINGS sub-menu, and then press the corresponding menu button to select it.
4) Hold down the BOTTOM LEFT BUTTON until the unit beeps - this may take up to 20 seconds. After it beeps, release the button and it will bring up a 4 digit code at the top of the screen. This is your Root Code. Note: Your root code is NOT 1111. It is the next set of four numbers displayed on the screen.
YOU NEED TO SEE THE FOLLOWING CODES
G131
00Y5
130E
9APY
KEEP DOING STEPS 1-4 UNTIL YOU GET ONE OF THE THREE CODES IT WILL TAKE AS MANY TIMES AS IT TAKES TO GET ONE OF THE 3 CODES
When you get one of the FOUR codes here is the 4 digits you enter
G131 ENTER 8CE3
00Y5 ENTER 66C8
130E ENTER CF07
9APY ENTER 47C3
5) Hit CLEAN UNIT this will VIN UNLOCK unit
USE AT YOUR OWN RISK !