Opel Immo Reader software

Comment télécharger? How to download?
Cliquez ici / Click here Image viewtopic.php?f=77&t=1294
Règles du forum
Comment télécharger? How to download?
Cliquez ici / Click here Image viewtopic.php?f=77&t=1294
Répondre
Avatar du membre
rgmaster3
Capitaine de navire (Admin)
Capitaine de navire (Admin)
Messages : 64278
Enregistré le : ven. 29 sept. 2017 21:51
Réputation : 54192
Localisation : Îles Cocos
A remercié : 4752 fois
A été remercié : 42213 fois
Sexe :
Zodiaque : Taureau
Contact :

Opel Immo Reader software

Message par rgmaster3 » ven. 14 août 2020 21:32

IMMOBILIZERS DIAGNOSTIC TESTER FOR OPEL CARS USER MANUAL

1. Opel OBD2 connector pins:
4 pin GND
16 pin +12V battery
3 pin K-line for old model immobilizers Motorola MCU
7 pin K-line for new model immobilizers Texas MCU
2 pin K-line for old model immo( Opel Sintra and some other models mostly for US market)

2. Software and system requiremets
OpelDT.EXE is a Windows based program that will work on any PC or laptop
that has instaled Microsoft Windows 98, 2000, ME, XP.

Hardware requrements:
Any PC or laptop with Pentium / 133MHz processor or greater, and a free USB port.

2.1 USB Drivers instalation
Caution: This hardware interface requires drivers instalation to work!
Please use only drivers that are supplied with this product. There are no other or better drivers.

For all Windows XP users:
Please disconnect your PC or laptop from Internet before install drivers!
Don't use Windows 'original' drivers! This is important!

2.2 How to install drivers:
Connect OBD interface to any free USB port. This will start Windows procedure to install drivers for new hardware found. Tell to Windows where the drivers are on your harddisk.
If Windows ask you for a file with extention ".cat", press "Skip File"!

2.3 Uninstall drivers
If you wish to uninstall drivers, go to control panel and uninstall drivers with standart procedure.

3. Programming new keys.

User can program up to 5 diferent keys to an immobiliser.
How to do this:
Insert new key, and switch ignition ON.
Connect to immobilizer.
Enter correct PIN code.
Press "Prog New Key "
Message 'Reading key...' will be displayed on screen.
After successful procedure there will be a message: 'Key programmed!'
Wait 10 seconds and turn ignition OFF.
Turn ON ignition with same key, and wait until yellow indicator lamp on car dash
stop flashing, and ligth on continiously. Start the car to test new key.
If the indicator lamp continue flashing, this means that transponder is not compatible to this car or engine ECU, try to program other transponder from another type.
If there are error message when try to program new key, user can read errors to see where is the problem.

4. Other commands
Please read menu on screen, and all messages when they appear.
There are detailed info for all commands.

Command 'Read PIN' for immo1 works only if pin code alredy have been entered sometimes before.
Immobiliser must be restarted, and OBD connector must be attached to the car, before try to read PIN code.
To restart immo, just disconnect immobilizer connector for 5 seconds and reconnect it.
Reading of PIN code for immo2 is not possible by OBD.

When you program new transponder without key, please keep transponder near as possible to the immo coil.

If there are error message when program new key, this means next thing:
Transponder is not compatible to Opel immobilizers.
Transponder can not be read.
Transponder is alredy programmed to immobilizer.
Immo is busy, in this case repeat command again.
There are alredy 5 keys programmed to immo, there is no room for another key.

There is a good news:
transponders for new model immos (crypto type) can be programmed to old model immo.
There is a bad news: transponders from other cars, for example VW can not be programmed to Opel immos.
Also sometimes transponder is programmed to immo, but car can't be started, in this case you are using a uncompatible type of transponder,
for example transponders from Astra-G doesn't work with Corsa-C.
There are many different types of transponders for Immo 2, depending on car, model and year of production.


5. How to work with software
Connect hardware interface to any free USB port of laptop and to OBD connector of the car.
Start program. Select Immo1 or Immo2 from menu and press "Connect Selected ECU"
If everything is OK after 5 seconds you will see immobilizer info on display.

:52:
* Comment obtenir le mot de passe ou le lien de téléchargement ?
* How do I get the password or download link?
Image viewtopic.php?f=222&t=9976

* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
Image viewtopic.php?f=77&t=296
Comment s'inscrire et prendre un abonnement?
How to register and take a subscription?
1.Comment s'inscrire sur le forum? / 1.How to register on the forum?
Image viewtopic.php?f=77&t=296
2.Comment prendre un compte premium? / 2.How To Take premium account?
Image viewtopic.php?f=77&t=1294
3.Comment rechercher sur le forum? / 3.How to search for the forum?
Image viewtopic.php?f=224&t=14788
4.Comment demander le lien de téléchargement et comment le recevoir par messagerie privée?
4.How to get the download link and how to receive it by private messaging?
Image viewtopic.php?f=222&t=9976

Compte d'abonnement
Subscription account
* Si votre compte donateur n'est pas activé! Contactez-nous par le formulaire de contact ci-dessous
* If your donor account is not activated! Contact us by the contact form below
Nous contacter / Contact us
Image memberlist.php?mode=contactadmin

Réglementation du téléchargement
Download rules
Image viewtopic.php?f=222&t=9976
* Remerciez l'auteur et notez positivement pour chaque application s'il vous plait.
* Deux téléchargements autorisés par jour.
* 15 téléchargements maximum, y compris trois packs (logiciels ou documents PDF).

* Thank the author and note positively for each application please..
* Two downloads authorized per day.
* 15 Downloads maximum, including three packs (software or PDF documents).

:405:

Avatar du membre
gelencser.norbert
Marin 1er Classe.
Marin 1er Classe.
Hungary
Messages : 1
Enregistré le : mer. 12 janv. 2022 19:43
Réputation : 0
Sexe :

Re: Opel Immo Reader software

Message par gelencser.norbert » mer. 12 janv. 2022 19:53

Hello. Would you like to send me a link? Thanks.

Répondre

255 derniers membres ayant consulté ce sujet

Avatar du membre benille, Avatar du membre RepairDone, Avatar du membre stephcamp, Avatar du membre Florianf47, Avatar du membre DiegoIgnazio, Avatar du membre Elite info35, Avatar du membre Bartekwww, Avatar du membre noviigrac1981, Avatar du membre Slavoka73, Avatar du membre edak9, Avatar du membre baltasnamas53, Avatar du membre Harry34, Avatar du membre paulolad, Avatar du membre buldogboys, Avatar du membre ufcio11, Avatar du membre nikolas2012, Avatar du membre rgmaster3, Avatar du membre gelencser.norbert, Avatar du membre NormanPhync, Avatar du membre aldoguasca, Avatar du membre Paulo4656, Avatar du membre sonho1999, Avatar du membre Autolab59, Avatar du membre aissa14

Retourner vers « Multimarques, ECU - IMMO - Radio Code - Airbag / Logiciels de Diagnostique »