Cummins Insite 8.7 + Patch, KM, KG & Instructions 2021

[rgmaster3]

Could you give me the download link?

Hello, check your private message

[Bennett856]

hello, may i havthe download link. please Delta Executor

In navigating the complex journey of home renovation and interior design, I've found the 'Delta Executor' to be an invaluable resource for streamlining projects and bringing visions to life with precision and creativity.

[raycogroup]

Hello I need the download link

Cummins Insite 8.7 + Patch, KM, KG, Instructions / FULL INSTALL KIT 2021
320 MB - Cloud Mega

Work 100% on windows 10

Content:
1. Insite 8.7.0.86 Install Files
2. Crack Launcher
3. KM 4 KG
4. Keygen
Cummins Insite 8.7.0.86 Install Instructions.txt


As of June 1st 2022, I can confirm this install via "Simulator Mode" can read, and overwrite READ ONLY parameters on a CM2350 block/ECM in a KW.

Cummins insite 8.7 install instructions:
1- Locate "1. Insite 8.7.0.86 Install Files" Folder, Open and <Right Click> + [Run As Admin] on "setup_8.7.0.86.exe"
1a- Run insite installer file, reboot if necesary.

2- Run update manager:
**allow update manager to close and update itself 6 or 7 times.**
--- UPDATE UNTIL THE FOLLOWING, THEN UPDATE THE FOLLOWING: ---
-until version 8.7.0.86
-fault view 3.1
-FIS files
-DPF Regen Analyzer
-Sulphur Tolerance monitor 1.0.5.3


**************DO NOT UPDATE TO 8.8!!!*****************

3- Close Update manager

4- Run Insite from desktop shortcut, [Accept] Terms & Conditions, Choose [Simulator Mode]
4a- Once open, <Left Click> on [Help] tab on top toolbar, choose [About INSITE],
4b- Verify 8.7.0.86 shows as current installed version.

5- Close Program > "Are you sure?' > [Yes]

6- Navigate to within "2. Crack Launcher" folder, Open it up, and Locate the Folder "CUMMINS INSITE 8.7 PRO" & <Right Click> + [Copy] that folder.

7- Open a new File explorer window, and navigate to " C:\Intelect ", Open the "Intelect" folder, and <Right Click> + [Paste] "CUMMINS INSITE 8.7 PRO"
folder into there.

8- Open "CUMMINS INSITE 8.7 PRO", and <Right Click> + [Run as admin].
***A new widnow will open, there will be 2 boxes, one with an Alpha-numeric code (8 x 4 digit/character combos), and 1 empty***
8a- Highlight the generated Combo Code in the top box, and <Right Click> + [Copy].


****LEAVE THIS WINDOW OPEN, YOU WILL NEED IT AGAIN!****

9- Press <Windows key> + <R>, and type in " Notepad "

10- In the newly opened Notepad window, <Right Click> + [Paste] the code into there.

11- Return to "C\Intelect\CUMMINS INSITE 8.7 PRO", find "CUMMINS INSITE 8.7 PRO.EXE", and <Right Click> + [Send to...], Choose [Desktop - Crete Shortcut]

12- Go to Desktop screen, and find newly created shortcut. <Right Click> + [Rename] and rename it to: "Insite 8.7 Pro",
12a- Locate Original/OEM " Cummins Insite " Icon, and <Right Click> + [DELETE]
****We dont want to confuse that one with the CRACKED one....****

13- Navigate to "3. KM 4 KG", and open it up to find "keymaker for Insite 8.7 keygen". <Right Click> + [Run as admin]
*a new window opens*

14- in the top section (should say " ???: " beside it), <Right Click> + [Paste] the combo from {Step 8a}
***There are 2 buttons on the bottom of this window, [ ????? ](5 x ?s) on the left, and [ ???? ] (4 x ?s) on the right.
14a- <Left Click> on the Left button [ ????? ], This will generate a code into the large box labelled "???:".

15- Move Mouse over the large combo, and rapidly hit <Left Click> 3 times, for good measure press <Ctrl key> + < A > to select all. <Right Click> + [COPY]
***Close this window***

16- Navigate to "4. KG" folder, open it, and find "Cummins 8.7 keygen.exe", <Right Click> + [Run as Admin]
***A new window opens***
16a- In the large empty Box, <Right Click> + [Paste] the code copied from {Step 15}, <Left Click> on the button [ ? ? ] on the bottom right of that window

***That Window Will close***
***A new window pops up***
16a- <Left Click> on [OK]

17- Return to temporary notepad file we created in {step 9}, and highlight the code from {Step 10}, <Right Click> + [COPY].
17a- Return to the new window opened up from {Step 16a}, and locate the top section. <Right Click> + [Paste] into there.
17b- <Left Click> on the LEFT button [ ????? ], a new code will generate into box #2,
17c- <Left Click x3> on the numbers in the second box, then <CTRL key> + < A > to select all, <Right Click> + [COPY]

18- Go to ORIGINAL Crack window (The one i said to leave open) from {Step 8}, and <Right Click> + [PASTE] into the second/larger box. <Left Click> [ ? ? ].
***A new window appears***
18b- Close the window from {Step 17}
18c- <Left Click> on [ OK ]
***a new window appears***
18d- <Left Click> on [ START ]
***Insite Starts to load***

19- If Prompted, Select [ Simulator Mode ]

20- Enjoy the program! Try not to CUMMINS her too hard.. XD
**If you didnt laugh, you need some INSITE into dry humour....XD

--------------

* The First Time you boot up, you shouldnt need to choose simulator mode, or activate license etc. but after a reboot or a new day or 2
* You will have to load up insite one time, choose simulator mode, close insite, and then reload it, it will bypass the license selection screen.
* At This point You can install any drivers you want for Insite useage, Nexiq, Inline, Cat Comm, whatever you are going to be using
* On My PERSONAL install of this, i use the firewall manager and create and INBOUND and OUTBOUND rule blocking " C:\Program Files (x86)\Cummins INC\UpdateManager\UpdateManager.exe "
* Additionally, I have been told if you run the program via "Activate License" prompt, itll mess up this install. I havent tested it, but its seems Plausible, so maybe, dont do that? <<<<<

--------------



* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
viewtopic.php?f=222&t=9976

* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296

[rgmaster3]

Hello I need the download link

Cummins Insite 8.7 + Patch, KM, KG, Instructions / FULL INSTALL KIT 2021
320 MB - Cloud Mega

Work 100% on windows 10

Content:
1. Insite 8.7.0.86 Install Files
2. Crack Launcher
3. KM 4 KG
4. Keygen
Cummins Insite 8.7.0.86 Install Instructions.txt


As of June 1st 2022, I can confirm this install via "Simulator Mode" can read, and overwrite READ ONLY parameters on a CM2350 block/ECM in a KW.

Cummins insite 8.7 install instructions:
1- Locate "1. Insite 8.7.0.86 Install Files" Folder, Open and <Right Click> + [Run As Admin] on "setup_8.7.0.86.exe"
1a- Run insite installer file, reboot if necesary.

2- Run update manager:
**allow update manager to close and update itself 6 or 7 times.**
--- UPDATE UNTIL THE FOLLOWING, THEN UPDATE THE FOLLOWING: ---
-until version 8.7.0.86
-fault view 3.1
-FIS files
-DPF Regen Analyzer
-Sulphur Tolerance monitor 1.0.5.3


**************DO NOT UPDATE TO 8.8!!!*****************

3- Close Update manager

4- Run Insite from desktop shortcut, [Accept] Terms & Conditions, Choose [Simulator Mode]
4a- Once open, <Left Click> on [Help] tab on top toolbar, choose [About INSITE],
4b- Verify 8.7.0.86 shows as current installed version.

5- Close Program > "Are you sure?' > [Yes]

6- Navigate to within "2. Crack Launcher" folder, Open it up, and Locate the Folder "CUMMINS INSITE 8.7 PRO" & <Right Click> + [Copy] that folder.

7- Open a new File explorer window, and navigate to " C:\Intelect ", Open the "Intelect" folder, and <Right Click> + [Paste] "CUMMINS INSITE 8.7 PRO"
folder into there.

8- Open "CUMMINS INSITE 8.7 PRO", and <Right Click> + [Run as admin].
***A new widnow will open, there will be 2 boxes, one with an Alpha-numeric code (8 x 4 digit/character combos), and 1 empty***
8a- Highlight the generated Combo Code in the top box, and <Right Click> + [Copy].


****LEAVE THIS WINDOW OPEN, YOU WILL NEED IT AGAIN!****

9- Press <Windows key> + <R>, and type in " Notepad "

10- In the newly opened Notepad window, <Right Click> + [Paste] the code into there.

11- Return to "C\Intelect\CUMMINS INSITE 8.7 PRO", find "CUMMINS INSITE 8.7 PRO.EXE", and <Right Click> + [Send to...], Choose [Desktop - Crete Shortcut]

12- Go to Desktop screen, and find newly created shortcut. <Right Click> + [Rename] and rename it to: "Insite 8.7 Pro",
12a- Locate Original/OEM " Cummins Insite " Icon, and <Right Click> + [DELETE]
****We dont want to confuse that one with the CRACKED one....****

13- Navigate to "3. KM 4 KG", and open it up to find "keymaker for Insite 8.7 keygen". <Right Click> + [Run as admin]
*a new window opens*

14- in the top section (should say " ???: " beside it), <Right Click> + [Paste] the combo from {Step 8a}
***There are 2 buttons on the bottom of this window, [ ????? ](5 x ?s) on the left, and [ ???? ] (4 x ?s) on the right.
14a- <Left Click> on the Left button [ ????? ], This will generate a code into the large box labelled "???:".

15- Move Mouse over the large combo, and rapidly hit <Left Click> 3 times, for good measure press <Ctrl key> + < A > to select all. <Right Click> + [COPY]
***Close this window***

16- Navigate to "4. KG" folder, open it, and find "Cummins 8.7 keygen.exe", <Right Click> + [Run as Admin]
***A new window opens***
16a- In the large empty Box, <Right Click> + [Paste] the code copied from {Step 15}, <Left Click> on the button [ ? ? ] on the bottom right of that window

***That Window Will close***
***A new window pops up***
16a- <Left Click> on [OK]

17- Return to temporary notepad file we created in {step 9}, and highlight the code from {Step 10}, <Right Click> + [COPY].
17a- Return to the new window opened up from {Step 16a}, and locate the top section. <Right Click> + [Paste] into there.
17b- <Left Click> on the LEFT button [ ????? ], a new code will generate into box #2,
17c- <Left Click x3> on the numbers in the second box, then <CTRL key> + < A > to select all, <Right Click> + [COPY]

18- Go to ORIGINAL Crack window (The one i said to leave open) from {Step 8}, and <Right Click> + [PASTE] into the second/larger box. <Left Click> [ ? ? ].
***A new window appears***
18b- Close the window from {Step 17}
18c- <Left Click> on [ OK ]
***a new window appears***
18d- <Left Click> on [ START ]
***Insite Starts to load***

19- If Prompted, Select [ Simulator Mode ]

20- Enjoy the program! Try not to CUMMINS her too hard.. XD
**If you didnt laugh, you need some INSITE into dry humour....XD

--------------

* The First Time you boot up, you shouldnt need to choose simulator mode, or activate license etc. but after a reboot or a new day or 2
* You will have to load up insite one time, choose simulator mode, close insite, and then reload it, it will bypass the license selection screen.
* At This point You can install any drivers you want for Insite useage, Nexiq, Inline, Cat Comm, whatever you are going to be using
* On My PERSONAL install of this, i use the firewall manager and create and INBOUND and OUTBOUND rule blocking " C:\Program Files (x86)\Cummins INC\UpdateManager\UpdateManager.exe "
* Additionally, I have been told if you run the program via "Activate License" prompt, itll mess up this install. I havent tested it, but its seems Plausible, so maybe, dont do that? <<<<<

--------------



* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
viewtopic.php?f=222&t=9976

* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296

Hello, check your private message
How do I receive the download link by private messaging?
More info: viewtopic.php?f=222&t=9976

[Luncheon]

Please the link, thanks man!

[rgmaster3]

Please the link, thanks man!

Hello, check your private message

[zwami7]

i need the links

[Geekgirldc]

Thank you, can I please have the download link?

[rgmaster3]

Thank you, can I please have the download link?

Hello, check your private message
How do I receive the download link by private messaging?
More info: viewtopic.php?f=222&t=9976

[solaya5612]

Thank you, can I please have the download link? Thanks very much