NaviDrive, WipCom 3D NG4 Europe 2023 + Firmware
12.5 GB - Google drive
Contains:
MAPAS 2023-1 (NG4).part1.rar
MAPAS 2023-1 (NG4).part2.rar
Firmware 42C
Countries Included:
Albania, Andorra, Austria, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Denmark, Estonia, Finland, France, Czech Republic Germany, Gibraltar, Greece, Hungary, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Republic of Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russian Federation, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom, Vatican City
Description:
Update of the WipCom 3D or NaviDrive 3D mapping on NG4 type PSA equipment.
Approximately between the years 2009-2012 and in vehicles such as the 308/3008/5008/RCZ and the C5
All ATLAS data comes from the Here version present in the update of BMW maps (BMW Road Map EUROPE WEST PREMIUM 2023-1)
Version info:
This Version offers traffic information via TMC, 3D and up-to-date mapping
INSTALLATION:
Prerequisites:
The on-board system must be an NG4 system from PSA The NG4 firmware must be in version N42c. If you don't have this version press HERE
PSA EUROPE 2023-1 (NG4) MAPPING on an SD card or USB key of at least 16GB, formatted in FAT32 (64KB).
You will therefore have at the root of your USB key:
pkgdb
config.nfm
PSA_ECEW_2023_1.0_3.43.1.md5
* Install the USB key or the SD card and start the car.
* A message appears on your screen, asking you to install the update
. Select “Yes” with the
“OK” button.
Warning: PSA systems offer an energy saving mode to preserve the battery when it is used for too long without charging (between
15 and 30 minutes). You must therefore start the vehicle to proceed with the installation.
(in the case of hybrid vehicles, remember to deactivate Eco mode because the vehicle
risks stopping).
* You will get an error 0x26 during installation. Leave the USB stick in place and press “OK”. The system reboots and the
update resumes where it left off.
At the end of the update, the system asks you to remove the USB key or SD card, then validate with Ok and the NG4 restarts.
* If everything went well, you are in version 2023-1.
You can check this by pressing and holding the Setup key, then selecting “Device details” and finally “Card versions”. Normally, you now read “NG4 EUROPE 2023 Edition 1.0”.
* Comment obtenir le lien de téléchargement ?
* How do I get the download link?
viewtopic.php?f=77&t=1294* Vous êtes un visiteur? Comment s'inscrire sur ce forum
* You are a visitor? How to register on this forum
viewtopic.php?f=77&t=296
