Remote Install - Scania Multi, SDP3, XCOM, BNS II Service Tool (BST)

[Aleksey-MS]

Remote Install - Scania Multi, SDP3, SDP2, XCOM, BNS II Service Tool (BST)

Scania Multi 10.2021 online (via remote desktop) 12 months - $135
Scania Multi 10.2021 online (via remote desktop) 3 months - $59
Scania Multi 10.2021 online (via remote desktop) 1 month - $35

Scania Multi 12.2023 - $155
Scania Multi 2022 - $65
Scania Multi 2020 - $35
Scania Multi is a car dealership aftermarket service. The program contains a catalog for the selection of spare parts and electronic manuals for repair and maintenance. Scania Multi works by VIN code and uses only the last 7 digits to decrypt the wines of a bus or truck. In the program there is a search by the part number, you can find out its applicability, as well as get information about the re-release of parts.


Scania SDP3 2.58.3 Truck, Bus, Marine (with keygen) - $299
Scania SDP3 2.59 Truck, Bus, Marine - $155
Scania SDP3 2.54 for Truck and Bus (with keygen) - $155
Scania SDP3 2.48 2021 - $35
SDP3 - Scania Diagnos + Programmer 3 (SDP3) software is designed for the diagnosis of Scania trucks and Scania industrial and marine engines. Connection to the electronic control units is done using the Scania VCI 2 or Scania VCI 3 interfaces. Depending on the version of the program, it supports work with all Scania trucks manufactured from 2004 to the present day.


Scania XCOM - $29
Scania XCOM - is a diagnostic tool to read, save, and modify ECU data such as trouble codes, parameters, statistic data etc. VCI2/VCI3 interface is used to connect to ECU via CAN protocol.

Supported modification of ECU data of the following types:

• EMS – Engine management system
• GMS – Gearbox management system
• RET – Retarder system
• AWD – All-wheel drive system
• CLS – Clutch Control
• EEC – Exhaust Emission Control
• COO (COO7) – Coordinator
• BWS (BCI1) – Bodywork system.

Scania Developer (CDEV - ECOM - XCOM) - $299
Scania CDEV supports the following operations:

• Read ECU ID, data, parameters, fingerprint.
• Read and erase DTC.
• SparePart program all systems.
• Gather all data for field test functions.
• Load, modify, compare SOPS files.

Scania ECOM - is a program that, together with the VCI2, enables the communication between your PC and the control unit (EMS S6) on the engine.
You can carry out the following operations with ECOM:

• Read stored fault codes and Freeze Frames.
• Clear inactive fault codes.
• Read information about stored working cycles.
• Measure internal variables such as the engine speed, pressure, temperature and save them to a file.
• Program certain parameters.

Scania BNS II Service Tool (BST) - $39
Scania BNS II Service Tool (BST) is a PC-based diagnostic program for troubleshooting and programming of the electrical system in the bodywork of Scania OmniCity, OmniLink, and Citywide buses.


Scania SOPS - $59
The program encrypts/decrypts SOPS files (contains data on parameters and specifications of all blocks of trucks or buses). Files can be downloaded using Scania VCI2.

Scania SOPS Editor Euro-6 2022 Unlimited - $570

Supports EURO 6 Scania Sops File Encryptor/Descriptor.

• Disable AdBlue
• Disable EGR
• Disable Immobilizer
• Change VIN
• Disable Nox Control
• Disable Torque Reduction NOx Control
• Disable Modify more than 300 other parameters...

Scania AdBlue Off Remover with short instructions - $45


Scania IMMO Pin Code Decryption 4.02 (activation 1 PC) - $165
It works with - ASSY, COO6, COO7, COO8, EMS S6/S7/S8/EMD1, LAS1/LAS2


Need it? Write to me to discuss.

[Aleksey-MS]

Added Scania SP2, SD2

[Aleksey-MS]

Added Scania Multi 2021

[Aleksey-MS]

Added:
Scania Multi 10.2021 online (via remote desktop) 12 months
Scania Multi 10.2021 online (via remote desktop) 3 months
Scania Multi 10.2021 online (via remote desktop) 1 month

[Aleksey-MS]

Added Scania Multi 2022

[Aleksey-MS]

Scania SOPS Editor Euro-6 2022 Unlimited
Scania SDP3 2.51 2022 Engine Marine Industrial, Truck Bus

[Aleksey-MS]

Added Scania SDP3 2.52

[Aleksey-MS]

Added
Scania AdBlue Off Remover with short instructions

[Aleksey-MS]

Added
Scania SDP3 2.53.3 for Truck and Bus (with keygen)
Scania SDP3 2.53.3 for Engine Marine Industrial (with keygen)

[Aleksey-MS]

Added
Scania SDP3 2.54.2 Truck, Bus